Part No.                                 Description      ... Read More

There have recently been widespread attacks by internet gamers on Network Time (NTP) servers - many computers, servers, and devices run these, and some GNSS receivers have proven to be vulnerable. See this article for a good description of the issue:... Read More

Enabling GNSS features on a NetR9. Downloadable  PDF document listed below. Read More

In addition to the directions outlined below, USB mode information for the NetR9 can also be found at the following link: http://trl.trimble.com/docushare/dsweb/Get/Document-574556/NetR9_USB_Device_Mode.pdf Installing the USB driver on your PC: C... Read More

The PDF files describes how to build a NetR8 or NetR9 DC power cable using the "36451‐02 Cable – 1PPS/Event/Power"  cable that is included in the purchase bundle. Read More

If you need to access your Trimble NetRS, NetR5, NetR8 or NetR9 receiver using HTTPS without using Internet Explorer, there is now a work around for using a Firefox browser. The steps below outline how to configure your Firefox browser to accept the... Read More

NetR5, NetR8, and NetR9 hardware requires that Power On and Shutdown Voltages be properly configured to ensure proper functionality when used with DC power systems.  UNAVCO has determined, and Trimble has confirmed, that a NetR5, NetR8, or NetR9... Read More

When using the web interface over a slow or latent ethernet or PPP connection, NetR5, NetR8, and NetR9 pages have been reported to load incompletely or function improperly.  In some of these cases the use of "Private Browsing" in your web... Read More

Purpose... Read More

To fully enable an external frequency source: 1) Attach a 10MHz external frequency source to the BNC port (2) on the rear of the receiver.  2) Disable clock steering (Receiver Configuration -> Tracking -> Clock Steering) 3) Enable External... Read More