If you need to access your Trimble NetRS, NetR5, NetR8 or NetR9 receiver using HTTPS without using Internet Explorer, there is now a work around for using a Firefox browser. The steps below outline how to configure your Firefox browser to accept the lower https encryption level used by Trimble receivers.

1. Type "about:config" in the address bar of a Firefox tab.  Click "I’ll be careful, I promise!".
2. Type "ssl3.rsa" in the "Filter" field to make it easier to find the target.
3. You’ll see "security.ssl3.rsa_1024_rc4_56_sha    default    boolean    false"
4. Double click the "security.ssl3.rsa_1024_rc4_56_sha" line and it will change the status to "user set" and value to "true".
5. That change will persist, so you can now go to https://(your receiver’s ip) and you’ll  be presented with additional security warnings.  Click the "I Understand the Risks" arrow shown below.
6. Click "Add Exception", then when you see the screen below, with the "Permanently Store Exemption" box checked, click "Confirm Security Exemption". 
7. From now on you will be able to, transparently and without further warning prompts, access the receiver’s IP address via https from the newly configured browser. You’ll need to create addtional security exceptions using steps 5 and 6 for each receiver that you wish to access via HTTPS.