Skip to Content
| GAGE


Trimble NetR9 Resource Page

NetR9 Owners should visit this page for critical information on configuring power settings to ensure proper operation.

Back to receiver comparison page
Receiver
GNSS ?
Available as special buy
Available on loan
Serviceable at UNAVCO
File Size (24 hr, 15 s)
Memory
Time lasts recording at 15 s
Power draw w/ antenna
Time lasts on 18amphr battery
Trimble NetR9
Y

Y

Y

Y

0.9 MB

Up to 8 GB Internal + External USB

24 years at 8 GB

3.8 W

2.4 days
  • Configure through the screen or via an http interface; no special programming software.

  • Download data via the http interface or via ftp; no special downloading software.

  • Has ftp push capabilities.

  • Records GPS L1, L2, L2C, L5, GLONASS, Galileo, BeiDou, QZSS, and SBAS.

  • Native data format is .T02; can stream RT27, BINEX, RTCM and other real-time standard formats.

  • External USB drive support

  • The maximum number of sessions available depends on the logging rate of the enabled sessions. The sum, in Hz, of all the logging rates of the enabled sessions cannot exceed ~60 Hz.

Resources

Firmware and Configuration

  • Trimble NetR9 Receiver - Current Firmware Version details and downloads
  • UNAVCO standard configuration files for the NetR9 (updated for each firmware version)
  • Where available, UNAVCO recommends using an external LVD between the receiver and a battery power source to ensure that the receiver always powers up. Please see the receiver configuration  details page when using an LVD.
  • If an external LVD is not available for use at a remote continuous site, then UNAVCO recommends enabling Shutdown Override in the Receiver Configuration -> General menu. Shutdown Override prevents the unit from shutting down when an external voltage above the Power On Voltage is present.  Caution : enabling Shutdown Override will override Data Logging/Power Saving settings, Application File Power-Up Timer settings, as well as the front panel power button. 
  • NetR9 Owners should  visit this page  for a critical information regarding use of versions 4.41, 4.42 and 4.43.

Testing

 

  • Attached Files
  • rx_power_tests_11_2019.pdf (29.04 KB) 669
  • NetR9 battery removal (824 KB) 180
  • RECEIVER IN REMOTE MONITOR (10.16 MB) 169
  •  

    Last modified: 2019-12-27  16:36:35  America/Denver