Trimble NetR9 Resource Page

NetR9 Owners should visit this page for critical information on configuring power settings to ensure proper operation.

Back to receiver comparison page	Receiver	GNSS ?	Available as special buy	Available on loan	Serviceable at UNAVCO	File Size (24 hr, 15 s)	Memory	Time lasts recording at 15 s	Power draw w/ antenna	Time lasts on 18amphr battery
	Trimble NetR9	Y	Y	Y	Y	0.9 MB	Up to 8 GB Internal + External USB	24 years at 8 GB	3.8 W	2.4 days

• Configure through the screen or via an http interface; no special programming software.

• Download data via the http interface or via ftp; no special downloading software.

• Has ftp push capabilities.

• Records GPS L1, L2, L2C, L5, GLONASS, Galileo, BeiDou, QZSS, and SBAS.

• Native data format is .T02; can stream RT27, BINEX, RTCM and other real-time standard formats.

• External USB drive support

• The maximum number of sessions available depends on the logging rate of the enabled sessions. The sum, in Hz, of all the logging rates of the enabled sessions cannot exceed ~60 Hz.

Resources

• What to try if NetR9 is in "RECEIVER IN REMOTE MONITOR" (PDF below)
• Basic Use of the Trimble NetR9 (link to NeR8 page, same process)
• Trimble NetR9 Data Sheet (.pdf)
• Trimble NetR9 Receiver User Guide (.pdf)
• Trimble NetR9 RTX Configuration

Firmware and Configuration

• Trimble NetR9 Receiver - Current Firmware Version details and downloads
• UNAVCO standard configuration files for the NetR9 (updated for each firmware version)
• Where available, UNAVCO recommends using an external LVD between the receiver and a battery power source to ensure that the receiver always powers up. Please see the receiver configuration  details page when using an LVD.
• If an external LVD is not available for use at a remote continuous site, then UNAVCO recommends enabling Shutdown Override in the Receiver Configuration -> General menu. Shutdown Override prevents the unit from shutting down when an external voltage above the Power On Voltage is present.  Caution : enabling Shutdown Override will override Data Logging/Power Saving settings, Application File Power-Up Timer settings, as well as the front panel power button. 
• NetR9 Owners should  visit this page  for a critical information regarding use of versions 4.41, 4.42 and 4.43.

Testing

• Critical Power On and Shutdown Voltage Information
• Use of external USB Memory with NetR9 Receivers
• 24 hour power test without usb thumb drive (mean = 3.2 W)
• 12 hour power test with usb thumb drive connected (mean = 3.67 W)
• Updated power tests (11/2019)

Article ID: 673
Created: August 17, 2015
Last Updated: April 18, 2024
Author: Freddy Blume

Online URL: https://kb.unavco.org/article/trimble-netr9-resource-page-673.html