How to configure a Trimble NetRS for use with a Vaisala WXT510 metpack in the Plate Boundary Observatory

1. Create ’Met_Z’ data logging session and enable

   • continuous logging

   • file duration ’60’min

   • T00 ’off’ Binex ’on’

   • Binex options

     • Measurements

       • ’15 Sec’ interval

       • all optons ’off’

       • System Status Record ’off’

     • Metadata

       • ’30 Min’ interval

       • Site decription ’on’

       • Station ID ’on’

       • Firmware Version ’on’

       • All others ’off’

   • 
     

   • File naming (The Session Identifier) ’z’

   • Directory options ’Create Per-SessionID subdirectories’

2. Set reserve space for ’z’ session data.

   • Set Autodelete to ’10’ MBytes

   • Set pool ’z’ size to ’100’ MBytes and enable Autodelete

   • Reset pool ’c’ size to ’500’ MBytes

3. Set I/O SerialPort 2 and enable

   • Service ’Met-Tilt’

   • Baud 19200

   • Parity ’None’

   • Flow Control ’None’

   • Parameters for Met/Tilt mode
     0R0    1 minutes