UNAVCO Resources: Meteorological Systems

The Paroscientific MET3 Meteorological Measurement System measures barometric pressure, relative humidity, and temperature. The meteorological data is stored within the GPS data stream and can be extracted from the GPS data. The MET3 was one of three meteorological systems approved for use in the SuomiNet GPS network. The table below shows the different receivers UNAVCO has used with the MET3.  For more information on the MET3, see the Paroscientific GPS Meteorology Support Site.

• How to integrate the Paroscientific MET3 with the Topcon NET-3G

• MET3 and MET3A Meteorological Measurement Systems Data Sheet (.pdf)

• User’s Manual for MET3 and MET3A Meteorological Measurement Systems (.pdf)

• Paroscientific Technical Note: Integrating Digiquartz MET3 and MET3A Broadband Meteorological Systems with a Trimble NetRS GPS Receiver (.pdf)

• Paroscientific "Power Adapter Kit RS-232 Intelligent Transmitter" diagram (.pdf)

• MET3/Receiver Compatibility Comparison:

   

  Receiver Manufacturer	Receiver/MetPack Interface Capabilities
  Trimble	The Trimble receivers interface with the MET3, but they must have the Tiltmeter Option enabled. Currently, UNAVCO is building custom cables to connect to a MET3, and simultaneously working with Trimble so the cable can be puschased directly from Trimble in the future.
  Ashtech	Ashtech receivers interface directly with the MET3. The connecting cable can be purchased from Paroscientific (manufacturer of the MET3).
  Allen Osborne & Associates	AOA receivers do NOT interface with the MET3. MET3 data must be logged to a computer.