Septentrio PolaRx5 Resource Page

Back to receiver comparison page	Receiver	GNSS ?	Available as special buy	Available on loan	Serviceable at UNAVCO	File Size (24 hr, 15 s)	Memory	Time lasts recording at 15 s	Power draw w/ antenna	Time lasts on 18Ahr battery
	Septentrio PolaRx5	Y	Y	Y	N	6.9 MB	Up to 32 GB Internal or Extended External	N/A	4.0 W	~1.8 days

Configure via http interface or RxControl.
Download data via HTTP interface or FTP; no special downloading software required.
Has FTP push, RSYNC and IP filtering capabilities.
Records GPS L1, L2, L2C, L5, GLONASS, Galileo, BeiDou, QZSS, and SBAS.
Native data format is SBF; can stream SBF, BINEX, NMEA and RTCM real-time formats.
Supports logging to External USB drive.
Supports up to 8 logging sessions.

Firmware

Current publicly available version is 5.4.0
In June 2021 Septentrio has identified an issue affecting receivers with serial numbers newer than 4502163 (manufactured in 2018 or later) that can cause the loss of the receiver’s internal memory that can only be recovered by an on-site power cycle. Users should contact support@septentrio.com for a patch that can be applied to receivers already running 5.40 to prevent this from occurring.
*NOTE - Firmware version 5.3.0 and above fixes a critical data logging bug and should be loaded as soon as possible to avoid data loss.
Download from Septentrio PolaRx5 Support website . (only latest version available, older versions available below)
5.4.0 Release Notes
Run this script to enable new signals and satellites. Set_full_tracking
Firmware versions should be installed without skipping over major versions. Here are some firmware upgrade notes.

Article ID: 838
Created: December 24, 2015
Last Updated: August 27, 2021
Author: Henry Berglund

Online URL: https://kb.unavco.org/article/septentrio-polarx5-resource-page-838.html