Trimble 4700 Resource Page

Trimble 4700 Resource Page

Back to receiver comparison page	Receiver	GNSS ?	Available as special buy	Available on loan	Serviceable at UNAVCO	File Size (24 hr, 15 s)	Memory	Time lasts recording at 15 s	Power draw w/ antenna	Time lasts on 18amphr battery
	Trimble 4700	N	N	Y	N		0 MB	requires external data collection	4.5 W	1.7 days

UNAVCO no longer supports the Trimble 4700. The 4700 is still in use throughout SuoimiNet, an atmospheric monitoring network.

• Program through a Trimble TSC1 survey controller or using Trimble R-Utilities v4.2b on a LINUX system.

• No downloading; there is no data storage. Receivers stream to a computer or to the TSC1 survey controller.

• No screen; LED lights indicate operating mode.

• Receives L1, L2.

Trimble Resources

• Trimble 4700 Specifications Sheet (.pdf)

Software

• Trimble Data Transfer Utility
  Download data from various devices including the Trimble 4700 and survey controllers onto a Windows system.

• Trimble R-Utilitites
  Remotely control receivers from Windows, LINUX, or Solaris systems. No longer supported by Trimble.

• Trimble runpkr00
  Extract .DAT or .TGD files from R00/T00/R01 files on Windows, LINUX, or Solaris systems.

• Trimble Convert to RINEX Utility
  Convert .DAT, .T00, or .T01 files to RINEX version 2.10, 2.11, or 3.00 formats.

• Trimble Remote Controller v2.21
  Provides virtual access to all receiver functions via a GUI simulating a Trimble 4000SSi/SSE receiver on a Windows platform.

How To’s and FAQ

• Trimble 4700/4800 - Quick Start Guide

• Trimble 4700/5700/R7 - How to configure for kinematic surveys

• Trimble WinFlash and How to load new firmware onto the Trimble 4700 receiver

SuomiNet-specific Resources

SuomiNet is an international network of GPS receivers, configured and managed to generate near real-time estimates of precipitable water vapor in the atmosphere, total electron content in the ionosphere, and other meteorological and geodetic information. Visit the SuomiNet Home Page.

• SuomiNet Trimble 4700 Firmware

  • Version 1.37 build April 04, 2001: 137APR04.47.s

  • Version 1.35 build September 27, 2000: 135SEP27.47.s

• SuomiNet R-Utilities for Linux
  This is a set of tools for configuring or downloading data from the Trimble 4700 receiver using a direct serial connection. Note R-Utilities is currently the only product that allows you to configure a met device.

  • RUtils.251.tar.gz (version 2.51 TEST)

  • rutils242b.tar.Z

  • suomi000929rutils.tar (old)

  • rutils.4700.2.42a.tar (old)

• WinStream - SuomiNet R-Utilities for a Windows platform
  See description for R-Utilities, above.

  • RUtils.251.zip (version 2.51 TEST)

  • RUtils2.42b.WIN32.zip

  • WinStream.zip (old)

• Notes on Software Use for SuomiNet
  

  • Remote Controller (above) supports configuration of all SuomiNet functionality except the configuration of a meteorological sensor. However, you can view the met results using this interface.

  • Some SuomiNet functionality such as Binex streaming, disabling multipath, met initialization, and changing phase bandwidth are not available through Configuration Toolbox.

• General Notes on R-Utilities
  Use the following command to change the receiver’s baud rate:

  ./rsetup -d/dev/ttys0 -h9600,8,o,1 -238400,8,n,1,0

  where -h (host) indicates the current comm port settings on the receiver (in this case, 9600, 8, n, 1) and the -2 specifies the desired change (in this case, 38400, 8, n, 1.) The extra 0 means that flow control is disabled.

  For rcontrol, you can now specify -dynamic or -static in the command line and the carrier phase with be updated accordingly. If this option is not specified, -static is the default.

• SuomiNet Site Network Rules Regarding Port Access

Article ID: 474
Created: September 24, 2010
Last Updated: September 24, 2010
Author: Beth Bartel

Online URL: https://kb.unavco.org/article/trimble-4700-resource-page-474.html