)
PC/104 - PC/104 Processor Specifications
PC/104 Processor Specifications
Processor board is shown next to a floppy disk for size comparison.
Electrical Specifications
1.1
| Bus Interface | PC/104 8-bit or 16-bit expansion Bus |
| System Clock | Factory configured for 133 MHz |
| Interrupts | TTL level input |
| VCC | +5V +/-5% at 1300mA typical at 133MHz and 32MB DRAM |
| VCC1 | +12V +/-5% (Not required. PC/104 Expansion only) |
| VCC2 | -12V +/-5% (Not required. PC/104 Expansion only) |
Memory
1.2
| Addressing | 32 Megabyte addressing |
| BIOS ROM | 128K PEROM |
| Memory | Factory installed SMT DRAM in sizes from 8M to 32M |
| SSD Memory | One 32-pin JEDEC standard sockets support 4-MBit SRAM, 4MBit PEROM, 4-MBit EPROM, 16-MBit EPROM or the M-Systems 32-pin DOC (DiskOnChip) module |
Mechanical
1.3
| Dimensions | 3.6 * 3.8 (without PC/104 modules or cables) |
| PC-Board | FR4 Epoxy Glass with 4 signal layers and 2 power planes with screened Component legend, and plated through holes |
| Jumpers | 0.025" square posts on 0.10" centers |
| Connectors | Mulit I/O -- 50 pin RN type IDH-50-LP |
|
|
Floppy Disk -- 34 pin RN type IDH-34-LP |
|
|
Fixed Disk -- 40 pin RN type IDH-40-LP |
|
|
PC/104 BUS -- 64 pin SAMTEC type ESQ-132-12-G-D 40 pin SAMTEC type ESQ-120-12-G-D |
|
|
Power/Reset Connector -- 8 pin Molex 22-12-2084 |
|
|
Mouse -- 5 pin latching type Molex 22-12-2054 |
|
|
Speaker -- 3 pin latching type Molex 22-12-2034 |
Environmental
1.4
| Operating Temperature | -40 to +70 |
| Non-Condensing Humidity | 5% to 95% |