<?xml version="1.0"?>

<rss version="2.0">


<channel>
<title>Home - All Categories - Software  - Remote PC Software  - RedHat Linux  </title>
<link>https://kb.unavco.org/category/software/remote-pc-software/redhat-linux/107/</link>
<description>This RSS Feed contains Articles of Category in the knowledge base. You can click on the title to view its content. Powered by PHPKB (https://www.phpkb.com)</description>
<item>
										<guid>https://kb.unavco.org/article/howto-3-how-to-configure-ppp-for-serial-tcp-ip-phone-or-wireless-connections-between-a-local-and-remote-linux-box-268.html</guid>
										<title>HOWTO.3: How to configure PPP for serial TCP/IP phone or wireless connections between a local and remote Linux box</title>
										<link>https://kb.unavco.org/article/howto-3-how-to-configure-ppp-for-serial-tcp-ip-phone-or-wireless-connections-between-a-local-and-remote-linux-box-268.html</link>
										<description><![CDATA[HOWTO.3: How to configure PPP for serial TCP/IP phone or wireless connections between a local and remote Linux box  A. Phone connection  Note: It is a good idea to set up a basic dial-up connection and check that the serial link and mgetty program...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/how-to-configure-a-courier-v-everything-33-6-modem-for-various-data-transfer-modes-via-a-linux-box-265.html</guid>
										<title>How to configure a Courier V.Everything 33.6 modem for various data transfer modes via a Linux box</title>
										<link>https://kb.unavco.org/article/how-to-configure-a-courier-v-everything-33-6-modem-for-various-data-transfer-modes-via-a-linux-box-265.html</link>
										<description><![CDATA[How to configure a Courier V.Everything 33.6 modem for various data transfer modes via a Linux box Note: You don't have to mess with any of the internal register settings for the modes listed below! Note that the configurations described below have...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/how-to-configure-poweralert-on-linux-with-the-apc-backups-pro-280va-and-the-poweralert-executable-272.html</guid>
										<title>How to configure PowerAlert on Linux with the APC BackUPS Pro 280VA, and the PowerAlert executable</title>
										<link>https://kb.unavco.org/article/how-to-configure-poweralert-on-linux-with-the-apc-backups-pro-280va-and-the-poweralert-executable-272.html</link>
										<description><![CDATA[How To Configure   PowerAlert on Linux with the APC BackUPS Pro 280VA (v2.0, 5Sept2002) This How-To explains the steps involved in setting up a Dell or Penguin computer system with Red Hat Linux v7.3 for use with the APC BackUPS Pro 280VA...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/how-to-configure-powerchuteplus-on-linux-with-the-apc-backups-pro-280va-and-the-powerchuteplus-executable-2002-273.html</guid>
										<title>How to configure PowerChutePlus on Linux with the APC BackUPS Pro 280VA, and the PowerChutePlus executable (2002)</title>
										<link>https://kb.unavco.org/article/how-to-configure-powerchuteplus-on-linux-with-the-apc-backups-pro-280va-and-the-powerchuteplus-executable-2002-273.html</link>
										<description><![CDATA[How To Configure   PowerChutePlus on Linux with the APC BackUPS Pro 280VA (v1.0, 7Feb2002 written by: Jay Sklar) This How-To explains the steps involved in setting up a Dell or Penguin computer system with Red Hat Linux v7.1 for use with the APC...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/howto-4-how-to-install-genpower-and-power-monitoring-software-269.html</guid>
										<title>HOWTO.4: How to install GENPOWER and Power Monitoring Software</title>
										<link>https://kb.unavco.org/article/howto-4-how-to-install-genpower-and-power-monitoring-software-269.html</link>
										<description><![CDATA[HOWTO.4: GENPOWER and Power Monitoring Software Install A number of modified system initialization and shutdown scripts, as well as an automated GENPOWER install script have been bundled into this in-house release of the GENPOWER software. With this...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/howto-6-how-to-recover-from-trashed-file-systems-boot-and-mount-problems-271.html</guid>
										<title>HOWTO.6: How to recover from trashed file systems (boot and mount problems)</title>
										<link>https://kb.unavco.org/article/howto-6-how-to-recover-from-trashed-file-systems-boot-and-mount-problems-271.html</link>
										<description><![CDATA[HOWTO.6: Boot and mount  problems: recovering from trashed file systems   Troubleshooting booting problems with LILO:  Case 1: The installation of LILO in the Master Boot record is not successful. If Linux replaces another operating system previously...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/howto-5-how-to-add-one-or-more-serial-cards-to-a-linux-box-and-avoid-irq-and-memory-address-conflicts-270.html</guid>
										<title>HOWTO.5: How to add one or more serial cards to a Linux box and avoid IRQ and memory address conflicts</title>
										<link>https://kb.unavco.org/article/howto-5-how-to-add-one-or-more-serial-cards-to-a-linux-box-and-avoid-irq-and-memory-address-conflicts-270.html</link>
										<description><![CDATA[HOWTO.5: Adding one or more serial cards to a Linux Box and avoiding IRQ and memory address conflicts.  The information below can be used as general guidelines for the installation of any serial card; however the suggested recommendations were tested...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/ssh-for-redhat-linux-versions-5-2-6-2-7-1-and-7-3-274.html</guid>
										<title>ssh for RedHat Linux versions 5.2, 6.2, 7.1, and 7.3</title>
										<link>https://kb.unavco.org/article/ssh-for-redhat-linux-versions-5-2-6-2-7-1-and-7-3-274.html</link>
										<description><![CDATA[ssh for RedHat Linux versions 5.2, 6.2, 7.1, and 7.3 ssh for RedHat Linux v7.3: ssh-2.4.0-1.i386.rpm ssh for RedHat Linux v7.1: openssh-3.1p1-1.tar ssh for RedHat Linux v6.2: openssh-2.5.2p2-1 (not available on this site) ssh for RedHat Linux v5.2:...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/howto-2-how-to-configure-for-a-remote-terminal-session-to-a-linux-box-through-a-phone-or-wireless-connection-267.html</guid>
										<title>HOWTO.2: How to configure for a remote terminal session to a Linux box through a phone or wireless connection</title>
										<link>https://kb.unavco.org/article/howto-2-how-to-configure-for-a-remote-terminal-session-to-a-linux-box-through-a-phone-or-wireless-connection-267.html</link>
										<description><![CDATA[HOWTO.2: How to configure for a remote terminal session to a Linux Box through a phone or wireless connection A: Phone connection For more information on the configuration setup for the US Robotics Courier V.Everything modems for this application,...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/how-to-install-nut-v0-45-4-1-on-linux-with-the-apc-backups-pro-280va-september-2002-297.html</guid>
										<title>How to install Nut v0.45.4-1 on Linux with the APC BackUPS Pro 280VA (September 2002)</title>
										<link>https://kb.unavco.org/article/how-to-install-nut-v0-45-4-1-on-linux-with-the-apc-backups-pro-280va-september-2002-297.html</link>
										<description><![CDATA[How To Configure Nut v0.45.4-1 on Linux with the APC BackUPS Pro 280VA (v1.0, 27Sept2002 written by: Jay Sklar) This How-To explains the steps involved in setting up a Dell or Penguin computer system with Red Hat Linux v7.3 for use with the APC...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/ntp-for-redhat-linux-versions-5-2-6-2-7-1-and-7-3-275.html</guid>
										<title>ntp for RedHat Linux versions 5.2, 6.2, 7.1, and 7.3</title>
										<link>https://kb.unavco.org/article/ntp-for-redhat-linux-versions-5-2-6-2-7-1-and-7-3-275.html</link>
										<description><![CDATA[ntp for RedHat Linux versions 5.2, 6.2, 7.1, and 7.3 ntp for RedHat Linux v7.3: ntp-4.1.1-1.i386.rpm ntp for RedHat Linux v7.1: ntp-4.1.1-1.i386.rpm (same as above) ntp for RedHat Linux v6.2: xntpd / xntpdc (not available on this site) ntp for RedHat...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/wu-ftp-for-redhat-linux-versions-5-2-6-2-7-1-and-7-3-276.html</guid>
										<title>wu-ftp for RedHat Linux versions 5.2, 6.2, 7.1, and 7.3</title>
										<link>https://kb.unavco.org/article/wu-ftp-for-redhat-linux-versions-5-2-6-2-7-1-and-7-3-276.html</link>
										<description><![CDATA[wu-ftp for RedHat Linux versions 5.2, 6.2, 7.1, and 7.3 wu-ftp for RedHat Linux v7.3: wu-ftp-2.6.1-16.7x.1.i386.rpm wu-ftp for RedHat Linux v7.1: wu-ftp-2.6.1-16.7x.1.i386.rpm (same as above) wu-ftp for RedHat Linux v6.2: wu-ftp-2.6.1-0.6x.21.i386...]]></description>

									</item>
<item>
										<guid>https://kb.unavco.org/article/ppp-wvdial-guide-june-2000-295.html</guid>
										<title>PPP / WvDial Guide (June 2000)</title>
										<link>https://kb.unavco.org/article/ppp-wvdial-guide-june-2000-295.html</link>
										<description><![CDATA[PPP / WvDial Guide Written by Jonny5 v1.0, June 23, 2000 1.2 Requirements This document assumes that you've already successfully installed your    favourite Linux distribution, and that you have physically installed your    ISA hardware modem (NOT a...]]></description>

									</item>

</channel>

</rss>