The following power tests were conducted on GPS and GNSS antennas using an Agilent N6705 DC Power Analyzer. The following tests show short, 1-minute averages of measured power consumption. The power use of each antenna was tested at two separate voltages. Power use when connected to a receiver will vary depending on the antenna bias voltage of the reciever being used.
If you have questions, contact Henry Berglund (berglund @ unavco.org).
Make | Model | Bias 1 | Power 1 | Bias 2 | Power 2 |
---|---|---|---|---|---|
Ashtech | ASH701945E_M | 7.0V | 0.295 W | 5.0V | 0.212 W |
Leica | LEIAR10 | 7.0V | 0.257 W | 5.0V | 0.242 W |
Leica | LEIAR20 | 7.0V | 0.26 W | 5.0V | 0.25 W |
Septentrio | SEPTCHOKE_MC | 7.0V | 0.365 W | 5.0V | 0.26 W |
Septentrio | PolaNt_gg | 7.0V | 0.235 W | 5.0V | 0.168W |
Topcon | TPSCR.G3 | 7.0V | 0.212 W | 5.0V | 0.152 W |
Topcon | TPSPG_A1+GP | 7.0V |
0.22 W |
5.0V | 0.156 W |
Topcon | TPSG3_A1 | 7.0V | 0.212 W | 5.0V | 0.149 W |
Trimble | TRM57971.00 | 7.0V | 0.633 W | 5.0V | 0.436 W |
Trimble |
TRM29659-00 | 7.0V | 0.414 W | 5.0V | 0.265 W |
Trimble | TRM59800-80 | 7.0V | 0.712 W | 5.0V | 0.48 W |
Trimble |
TRM41249.00 | 7.0V | 0.712 W | 5.0V | 0.506 W |
Trimble |
TRM39105.00 | 7.0V | 0.737 W | 5.0V | 0.523 W |
Trimble | TRM59900-00 | 7.0V | 0.624 W | 5.0V | 0.448 W |
Article ID: 745
Created: November 26, 2014
Last Updated: November 26, 2014
Author: Henry Berglund
Online URL: https://kb.unavco.org/article/gnss-antenna-power-consumption-testing-745.html