Comms Example: 2 AOA TurboRogue GPS Receivers--2 Radio Modems--Radio Modem--CPU


2 AOA TurboRogue GPS Receivers--2 Radio Modems--Radio Modem--CPU

Equipment

In Use by UNAVCO Boulder Facility -

Possible Substitutions (based on site parameters)-

NOTE: The use of a repeater and directional antennas depends on the specifics of the site, distances signals need to travel, topography etc. For more information contact UNAVCO Support (supportunavco.org).

Connections in use by Boulder Facility

Equipment Configuration in use by Boulder Facility

Radio modems

The base radio modem is set to Point to Point Slave/Master Switchable and the callbook is set to call all numbers (of the slave transceivers). The remote transceivers are set to Point to Point Slave mode.

TurboRogue Receiver

Download Specifications

Download software: PERL scripts on Solaris.

NOTE: download rates will vary depending upon site location, local interference, phone line quality, and cellular service.



Article ID: 454
Created On: Thu, Jul 9, 2009 at 7:54 PM
Last Updated On: Thu, Jul 9, 2009 at 7:54 PM
Authored by: Beth Bartel [bartel@unavco.org]

Online URL: https://kb.unavco.org/kb/article/comms-example-2-aoa-turborogue-gps-receivers-2-radio-modems-radio-modem-cpu-454.html