Comms Example: 2 Trimble 4000SSE/SSi GPS Receivers--2 Radio Modems--Radio Modem--CPU
2 Trimble 4000SSE/SSi GPS Receivers--2 Radio Modems--Radio Modem--CPU
NOTE: The outdated and offensive "master-" terminology has been replaced with "Access point (AP) - Station/Endpoint (STA)" in all instances, but will still remain in the configuration software when implemented
Connections in use by Boulder Facility
Equipment Configuration in use by Boulder Facility
Radio modem is set to Point to Point Slave/Master Switchable mode and the callbook is set to call all numbers (of the slave transceivers). The remote transceivers are set to Point to Point Slave mode.
Confirm these settings in the receiver's CONTROL menu.
Download software: Trimble Remote Control version 2.201 (15 MAY 1996) for UNIX. All functions of Remote Control software work. Effective receiver file download speed: 4300 bps. [Note: Download rates will vary depending upon site location, local interference, phone line quality, and cellular service.]
This product is used to perform remote control of 4000SSE/SSi - RC receivers. The programs are available for HP-UX, DOS, SunOS 4.1.x, and Sun Solaris 2.x. The following summarizes the functions and utilities provided by the Remote control programs. Refer to the Trimble Remote Control documentation for details on these programs.
|Posted by: Beth Bartel - Thu, Jul 9, 2009 at 7:19 PM. This article has been viewed 5792 times.|
|Online URL: https://kb.unavco.org/kb/article/comms-example-2-trimble-4000sse-ssi-gps-receivers-2-radio-modems-radio-modem-cpu-451.html|