Knowledge Base

Trimble NetR9 Sub-Categories

Trimble NetR9 Articles RSS Feed
Using external USB memory and logging sessions - Trimble NetR9
Viewed 54337 times since Tue, May 6, 2014
May 2014 Notice:  Discontinue use of USB Storage on Trimble NetR9'sDue to receiver failures caused by USB drives all users should disable all logging sessions that write data to the /External directory, or physically unplug the drive from their... Read More
Trimble NetR9 Resource Page
Viewed 44197 times since Mon, Aug 17, 2015
NetR9 Owners should visit this page for critical information on configuring power settings to ensure proper operation. Back to receiver comparison page Receiver GNSS ? Available as special buy Available on loan Serviceable at... Read More
DC power cable for the Trimble NetR9
Viewed 15497 times since Tue, Feb 26, 2013
Part No.                                 Description      ... Read More
Trimble NetR5, NetR8 and NetR9 - Critical Power-On/Off Configuration Details
Viewed 13400 times since Thu, Oct 11, 2012
NetR5, NetR8, and NetR9 hardware requires that Power On and Shutdown Voltages be properly configured to ensure proper functionality when used with DC power systems.  UNAVCO has determined, and Trimble has confirmed, that a NetR5, NetR8, or NetR9... Read More
DDoS Attacks on NTP Servers affecting some GNSS receivers
Viewed 13282 times since Thu, Feb 20, 2014
There have recently been widespread attacks by internet gamers on Network Time (NTP) servers - many computers, servers, and devices run these, and some GNSS receivers have proven to be vulnerable. See this article for a good description of the issue:... Read More
Trimble NetR9 - How to enable an external frequency source
Viewed 9155 times since Thu, Feb 27, 2014
To fully enable an external frequency source: 1) Attach a 10MHz external frequency source to the BNC port (2) on the rear of the receiver.  2) Disable clock steering (Receiver Configuration -> Tracking -> Clock Steering) 3) Enable External... Read More
How to access Trimble NetR9 through USB
Viewed 7027 times since Tue, Aug 2, 2011
In addition to the directions outlined below, USB mode information for the NetR9 can also be found at the following link: http://trl.trimble.com/docushare/dsweb/Get/Document-574556/NetR9_USB_Device_Mode.pdf Installing the USB driver on your PC: C... Read More
Trimble NetRS, NetR5, NetR8, NetR9 - Unix commands for catching binex/RT17 streams
Viewed 6799 times since Thu, Feb 27, 2014
1.  nc 9999 | teqc -binex +rx_state     sends receiver voltage and temperature data to stdout from a binex stream    2.  nc 9999 | teqc -binex +met filename.met    ... Read More
Trimble NetR9 Receiver - GSOF Messages
Viewed 5752 times since Thu, May 15, 2014
General Serial Output Format (GSOF) messages are a Trimble proprietary format and can be used to send information such as position and status to a third-party device. More detailed information regarding the structure of this binary message format can... Read More
Trimble NetR9 - How to login when the login prompt missing
Viewed 5090 times since Thu, Mar 13, 2014
Background:... Read More
Trimble NetR5, NetR8, NetR9 - Using IP filtering
Viewed 4739 times since Thu, Feb 27, 2014
Purpose... Read More
Trimble NetR5, NetR8, and NetR9 Receivers: Hint for Using Web Interface With Slow Connection
Viewed 4078 times since Fri, Apr 29, 2011
When using the web interface over a slow or latent ethernet or PPP connection, NetR5, NetR8, and NetR9 pages have been reported to load incompletely or function improperly.  In some of these cases the use of "Private Browsing" in your web browser... Read More
HTTPS: Firefox workaround for Trimble receivers
Viewed 2980 times since Wed, Jan 25, 2012
If you need to access your Trimble NetRS, NetR5, NetR8 or NetR9 receiver using HTTPS without using Internet Explorer, there is now a work around for using a Firefox browser. The steps below outline how to configure your Firefox browser to accept the... Read More
How to build a NetR8 or NetR9 DC power cable
Viewed 2292 times since Wed, Jan 4, 2012
The PDF files describes how to build a NetR8 or NetR9 DC power cable using the "36451‐02 Cable – 1PPS/Event/Power"  cable that is included in the purchase bundle. Read More
Enabling GLONASS on NetR9
Viewed 1815 times since Fri, Jan 30, 2015
Enabling GNSS features on a NetR9. Downloadable  PDF document listed below. Read More
Trimble NetR9 power draw tests
Viewed 942 times since Thu, Jul 29, 2021
* NetR9 internal UPS should be configured to only charge internal battery when system voltage is 13+ volts Read More

Last modified: 2019-12-27  16:36:35  America/Denver