| UNAVCO
 


Knowledge Base

Trimble NetR8 Sub-Categories

Trimble NetR8 Articles RSS Feed
Hardware Limitation of Trimble NetR5 and NetR8 GNSS Receivers
Viewed 18171 times since Fri, Feb 15, 2013
Hardware Limitation of the Trimble NetR5 and NetR8 GNSS Receivers The Trimble NetR5 and NetR8 receivers are limited to tracking 3 pseudorange (code) channels per satellite at a time. This means for SV's that support L5, when L5 is disabled, L1 C... Read More
DDoS Attacks on NTP Servers affecting some GNSS receivers
Viewed 11888 times since Thu, Feb 20, 2014
There have recently been widespread attacks by internet gamers on Network Time (NTP) servers - many computers, servers, and devices run these, and some GNSS receivers have proven to be vulnerable. See this article for a good description of the issue:... Read More
Trimble NetR5, NetR8 and NetR9 - Critical Power-On/Off Configuration Details
Viewed 9037 times since Thu, Oct 11, 2012
NetR5, NetR8, and NetR9 hardware requires that Power On and Shutdown Voltages be properly configured to ensure proper functionality when used with DC power systems.  UNAVCO has determined, and Trimble has confirmed, that a NetR5, NetR8, or NetR9... Read More
Basic Use of the Trimble NetR8 Receiver
Viewed 8439 times since Fri, Dec 17, 2010
BASIC USE OF THE TRIMBLE NETR8   Table of Contents   1. Configuring the Receiver's Network Settings 2. Connecting to the netR8 via the Web Interface 3. Configuring the NetR8 for operation 4. Creating and Uploading a configuration file 5.... Read More
Trimble NetR8 Resource Page
Viewed 6696 times since Tue, Feb 19, 2013
Trimble NetR8 Resource Page Back to receiver comparison page Receiver GNSS ? Available as special buy Available on loan Serviceable at UNAVCO File Size (24 hr, 15 s) Memory Time lasts recording at 15 s Power draw w/... Read More
HOW TO SET UP A TRIMBLE NETRS AND NETR8/NETR9 FOR RTCM STREAMING OVER TCP/IP (NTRIP)
Viewed 4336 times since Mon, Dec 20, 2010
The Trimble NetRS and NetR8/NetR9 can be configured to stream correction data in various formats over tcp/ip or serial.  The transport of RTCM via tcp/ip is called NTRIP. NetRS -Attach the NetRS to an antenna (you will not be able to verify... Read More
Trimble NetR5, NetR8, and NetR9 Receivers: Hint for Using Web Interface With Slow Connection
Viewed 2983 times since Fri, Apr 29, 2011
When using the web interface over a slow or latent ethernet or PPP connection, NetR5, NetR8, and NetR9 pages have been reported to load incompletely or function improperly.  In some of these cases the use of "Private Browsing" in your web browser... Read More
Trimble NetR5, NetR8, NetR9 - Using IP filtering
Viewed 2191 times since Thu, Feb 27, 2014
Purpose... Read More
HTTPS: Firefox workaround for Trimble receivers
Viewed 2019 times since Wed, Jan 25, 2012
If you need to access your Trimble NetRS, NetR5, NetR8 or NetR9 receiver using HTTPS without using Internet Explorer, there is now a work around for using a Firefox browser. The steps below outline how to configure your Firefox browser to accept the... Read More
How to build a NetR8 or NetR9 DC power cable
Viewed 1484 times since Wed, Jan 4, 2012
The PDF files describes how to build a NetR8 or NetR9 DC power cable using the "36451‐02 Cable – 1PPS/Event/Power"  cable that is included in the purchase bundle. Read More

Last modified: Monday, 12-May-2014 00:18:29 UTC