| UNAVCO
 


Knowledge Base
Telebit Worldblazer (T3SA) Articles RSS Feed
Comms Example: Telebit Worldblazer - Receiver--Phone Modem--Phone Modem--CPU Configuration
Viewed 16000 times since Wed, Jul 8, 2009
Telebit Worldblazer - Receiver--Phone Modem--Phone Modem--CPU Configuration NOTE: Download rates will vary depending upon site location, local interference, phone line quality, and cellular service. The remote modem (at the GPS receiver) is... Read More
Telebit WorldBlazer (T3SA) - Configuration Examples
Viewed 8427 times since Wed, Jul 1, 2009
Telebit WorldBlazer (T3SA) - Configuration Examples Suggested modem settings for local connection (modem attached to download computer), firmware v.LA7.05C, receiving data from a Trimble 4000 SSE/SSi Suggested modem settings for remote... Read More
Telebit Worldblazer - Suggested Register Settings Using a Direct Connection
Viewed 8219 times since Tue, Jun 30, 2009
Telebit Worldblazer - Suggested Register Settings Using a Direct Connection Trimble 4000 SSE/SSi Below are the suggested settings of the Telebit Worldblazer when directly attached to a Trimble 4000 SSE/SSi receiver and using the Trimble "rfile -f"... Read More
Comms Example: Telbit Worldblazer (T3SA) - Receiver--Radio Modem--Radio Modem--Phone Modem--Phone Modem Configuration
Viewed 7145 times since Wed, Jul 8, 2009
Telbit Worldblazer (T3SA) - Receiver--Radio Modem--Radio Modem--Phone Modem--Phone Modem Configuration NOTE: The use of a repeater and directional antennas depends on the specifics of the site, distances signals need to travel, topography etc.... Read More
Telebit WorldBlazer Quick Reference Card
Viewed 2895 times since Thu, Jan 15, 2009
Telebit WorldBlazer Quick Reference Card You may enter a command line of up to 80 characters in upper or lower case with the first command in the line preceded by an "AT" or "at" and the last command followed by a carriage return. The notation "(n)... Read More

Last modified: Monday, 12-May-2014 00:18:29 UTC