| UNAVCO
 


Knowledge Base

Trimble NetRS - User Guide, v1.11 Rev.A, November 2004

Attached Files (1)
Comments (1)
Comment by Terry on Thu, Jul 2nd, 2009 at 6:11 AM
Thanks for the guide. But i have some question regarding the ftp function of the trimble netrs. 1) I had configure the netrs to be running on a local LAN. It seem like after a few hours the ftp server on the netrs does not allow me to ftp in. But i still able to access the web interface of the netrs. 2) For the netrs i configure a static ip and with the default gateway to the router. But i not sure if my named server field should be point to the router or leave it blank. Please help me. Thanks alot..
Name
Email
Security Code Security Code
Related Articles RSS Feed
Trimble NetRS - tracking behavior changes after firmware upgrade
Viewed 2074 times since Thu, Mar 10, 2011
Trimble NetRS Receiver resets Run Time at 497.1 Days
Viewed 4835 times since Fri, Feb 1, 2013
Firmware glitch affects Trimble NetRS Receivers on 31 October, 2010
Viewed 5538 times since Tue, Jun 26, 2012
Can deleted files on a NetRS be recovered? (internal)
Viewed 796 times since Wed, Sep 16, 2009
HTTPS: Firefox workaround for Trimble receivers
Viewed 2249 times since Wed, Jan 25, 2012
Trimble NetRS Resource Page
Viewed 11163 times since Fri, Feb 1, 2013
Trimble NetRS - Power Draw Tests
Viewed 4685 times since Sun, Mar 28, 2010
HOW TO SET UP A TRIMBLE NETRS AND NETR8/NETR9 FOR RTCM STREAMING OVER TCP/IP (NTRIP)
Viewed 5050 times since Mon, Dec 20, 2010
Trimble NetRS - How to set up and take care of the UNAVCO NetRS campaign case in the field (case insert)
Viewed 4012 times since Mon, Jan 4, 2010
Power Draw Profile for Trimble NetRS and Iridium Systems
Viewed 5873 times since Sat, Aug 28, 2010
MENU

Last modified: Monday, 12-May-2014 00:18:29 UTC