| UNAVCO
 


Knowledge Base

Trimble NetR9 Power Consumption

The mean power consumption during a 12 hour test of the Trimble NetR9 receiver was: 3.67 W



Testing Procedure:
  • Input: 16 V
  • Agilent N6705B DC power analyzer
  • Power sampling rate: 10 Hz
  • Test was conducted at room temperature
  • Tracking GPS L1/L2 only
  • Logging one 15 second session
  • Ethernet port was connected (increases power use by ~0.1W)
  • Connected to a TRM59800.00 antenna
  • USB thumb drive attached (increases power use by ~0.4W)
  • Firmware version 4.43
Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
Leica GR10 Power Consumption
Viewed 7797 times since Tue, Oct 11, 2011
Topcon Net-G3A Power Consumption
Viewed 3570 times since Mon, Oct 10, 2011
SLA Battery Cold Performance Tests: Gel vs. AGM
Viewed 16470 times since Sun, Mar 28, 2010
Wind Power for Remote DC Powered Stations (2003)
Viewed 2830 times since Sat, Mar 27, 2010
Javad Sigma Power Consumption
Viewed 6644 times since Wed, Oct 5, 2011
Equipment Power Usage Testing
Viewed 9322 times since Sun, Mar 28, 2010
Remote Station Power Analysis (2007)
Viewed 3563 times since Sun, Mar 28, 2010
Power - Wind Power Testing at UNAVCO through 2005, Phase 3
Viewed 3984 times since Sat, Mar 27, 2010
Summary Report on Forgen 500 Wind Turbine Performance (2007)
Viewed 8214 times since Sat, Mar 27, 2010
GNSS Antenna Power Consumption Testing
Viewed 5453 times since Wed, Nov 26, 2014
MENU
 

Last modified: 2019-12-27  16:36:35  America/Denver