| UNAVCO


Knowledge Base

Trimble NetR9 - How to login when the login prompt missing

Background:

An uncommon firmware bug on the NetR9 can prevent login when security is enabled. For affected receivers, the ’Login’ menu item does not appear in the left hand pane of the web GUI under Security.

It has not been determined which firmware versions are affected.

screen shot 2014-03-13 at 2.09.39 pm.png 

Solution:

You can use the receivers programitic interface to reboot the receiver and then log in after it has completed its reboot.

Use the following unix command to send a http request to the receiver’s programatic interface:

curl -u username:password ’http://your_receiver_ip/prog/reset?system’

Replace username and password with your login credentials and replace your_receiver_ip with the ip address of the affected receiver. 

Allow ~50sec for the receiver to reboot before attemting to reconnect to the receiver.

For more information see the Programatic Interface Guide

Attached Files
There are no attachments for this article.
Related Articles RSS Feed
Trimble NetRS, NetR5, NetR8, NetR9 - Unix commands for catching binex/RT17 streams
Viewed 6799 times since Thu, Feb 27, 2014
Trimble NetR9 Resource Page
Viewed 44197 times since Mon, Aug 17, 2015
How to access Trimble NetR9 through USB
Viewed 7027 times since Tue, Aug 2, 2011
Trimble NetR9 Receiver - GSOF Messages
Viewed 5753 times since Thu, May 15, 2014
HTTPS: Firefox workaround for Trimble receivers
Viewed 2980 times since Wed, Jan 25, 2012
Trimble NetR5, NetR8, NetR9 - Using IP filtering
Viewed 4739 times since Thu, Feb 27, 2014
Enabling GLONASS on NetR9
Viewed 1815 times since Fri, Jan 30, 2015
Trimble NetR9 power draw tests
Viewed 942 times since Thu, Jul 29, 2021
Trimble NetR5, NetR8, and NetR9 Receivers: Hint for Using Web Interface With Slow Connection
Viewed 4078 times since Fri, Apr 29, 2011
DC power cable for the Trimble NetR9
Viewed 15497 times since Tue, Feb 26, 2013
MENU
 

Last modified: 2019-12-27  16:36:35  America/Denver