| UNAVCO
 


Knowledge Base

Trimble GPSurvey V2.35 - How to process GPS data (outline) (historical)

GPSurvey V2.35 - How to process GPS data (outline)

UNAVCO 10/9/00

  1. PROJECT: Create New or Open existing project

  2. LOAD data From DAT File: - CONFIG "interactive" or "quick edit/batch prompt"

  3. PROCESS Baselines – ADD files to process

    In WAVE processor:

    • EDIT:

      Station Position (check base station "fixed control" coordinates)
      Occupations (check antenna heights)

    • PROCESS:

      Setup (only to alter processing controls)
      Baselines to start data processing

    • FILE:

      Save results if satisfactory and Exit WAVE

  4. VIEW Network Map

  5. UTILITIES:

    Project Report to generate list of station coordinates and other output
    Coord Transformations to output continuous kinematic coordinates or transform coordinates

Outputting Continuous Kinematic Data Points From GPSurvey

  1. UTILITIES – select COORD TRANSFORMATIONS

  2. Set ASCII formats –

    From: Geographic
    To: Geographic (or other)

  3. Set Coordinate Systems –

    From: Geographic WGS84
    To: Geographic WGS84 (or other)

  4. Enter SSK File Coordinates: FILE-FROM-SSK FILE

  5. Select files to output from selection (identify SSK files from network map)

  6. Output to ASCII file: FILE-TO-ASCII FILE

  7. Name the file and access it through a text editor

Using Precise Orbits in GPSurvey

Precise orbits are required to reduce orbit error when processing baselines over 100km and centimeter level errors are significant.

  1. Connect to an online data center (such as http://sopac.ucsd.edu/cgi-bin/dbDataByDate.cgi) to access precise orbits.

  2. (For SOPAC) select "products" and "data".

  3. The orbit files are in the form: igsWWWWD.sp3. WWWW is the GPS week, D is the day of week.

  4. In DOS, convert the files to EF18 format: "sp3ef18 *.sp *.e18"

  5. Put the e18 files in the directory /gpsurvey/precise.

  6. In Wave, select Process-Setup-Advanced Controls-Ephemeris-Precise before processing the data.

Attached Files (1)
Comments (1)
Comment by NDUBUISI IKPO on Tue, Nov 18th, 2014 at 1:41 PM
I have been trying to load a RINEX file from Chinese GPS CHC but to no avail. It always encounters error during check-in stage. What could be the course?
Name
Email
Security Code Security Code
Related Articles RSS Feed
Trimble Geomatics Office - How to apply precise orbits in TGO
Viewed 7370 times since Tue, Feb 2, 2010
Trimble WinFlash - How to load new firmware onto the Trimble 4700 receiver
Viewed 21934 times since Mon, Dec 14, 2009
Trimble Geomatics Office - TGO v1.6 Rev.A, April 2002, User Guide
Viewed 2978 times since Fri, Jan 15, 2010
Processing Software Summary - Trimble Geomatics Office
Viewed 11403 times since Thu, Mar 11, 2010
Trimble runpkr00 Latest Versions
Viewed 39463 times since Mon, Sep 16, 2013
Trimble Configuration Toolbox (all versions)
Viewed 66437 times since Fri, Sep 24, 2010
Trimble Data Transfer Utility v1.52 (Feb 9, 2011)
Viewed 22983 times since Wed, Feb 9, 2011
Trimble Remote Controller v2.21
Viewed 22020 times since Fri, Feb 6, 2009
Trimble 5700/R7 - How to configure the receiver using Trimble Configuration Toolbox software
Viewed 26109 times since Tue, Jan 26, 2010
Trimble Geomatics Office - How to process fast-static and post-processing kinematic surveys using TGO
Viewed 56930 times since Tue, Jan 26, 2010
MENU
 

Last modified: 2019-12-27  16:36:35  America/Denver