| UNAVCO
 


Knowledge Base

Trimble 5700/R7 and Survey Controller - How to download data from the PCMCIA or compact flash card

Trimble 5700/R7 and TSC1 Survey Controller - How to download data from the PCMCIA or compact flash card

  1. Create a directory with the name of your project.

  2. Put the base station PC card into the card reader.

  3. Drag the base file(s) into your project directory.

  4. You may wish to rename the file, changing the first 4 numbers to “base”, leaving the Julian day and index number alone.

  5. Right click the file and choose convert to “.DAT” format.

  6. Place the rover’s PC card into the card reader.

  7. Open Trimble Data Transfer.

  8. Select PC card under device. Make sure the green connect button is depressed.

  9. Click the “Add” button.

  10. Select your project directory for the destination directory; click Open.

  11. Highlight your job file with a single click.

  12. Click Transfer All.

Attached Files (1)
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
MENU
 

Last modified: 2019-12-27  16:36:35  America/Denver