| UNAVCO
 


Knowledge Base

Topcon Net-G3A Power Consumption

The mean power consumption during a 12 hour test of the Topcon Net-G3A receiver was: 4.02 W


Testing Procedure:
  • Input: 12 V
  • Agilent N6705B DC power analyzer
  • Power sampling rate: 10 Hz
  • Test was conducted at room temperature
  • Tracking: GPS L1/L2 only
  • Logging one 15 second session
  • Ethernet port was connected (increases power use when connected)
  • Connected to a TRM59800.00 antenna
  • the receivers internal batteries were fully charged

Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
Power - Wind Power Testing at UNAVCO through 2005, Phase 2
Viewed 3469 times since Sat, Mar 27, 2010
SLA Battery Cold Performance Tests: Gel vs. AGM
Viewed 14926 times since Sun, Mar 28, 2010
Septentrio PolaRx5 Power Consumption
Viewed 2922 times since Fri, Jan 8, 2016
Power - Wind Power Testing at UNAVCO through 2005, Phase 1
Viewed 3492 times since Sat, Mar 27, 2010
Remote Station Power Analysis (2007)
Viewed 3237 times since Sun, Mar 28, 2010
Equipment Power Usage Testing
Viewed 8882 times since Sun, Mar 28, 2010
Summary Report on Forgen 500 Wind Turbine Performance (2007)
Viewed 7855 times since Sat, Mar 27, 2010
Trimble NetRS - Power Draw Tests
Viewed 4646 times since Sun, Mar 28, 2010
Power - Wind Power Testing at UNAVCO through 2005 (summary)
Viewed 2681 times since Sat, Mar 27, 2010
Leica GR10 Power Consumption
Viewed 7505 times since Tue, Oct 11, 2011
MENU

Last modified: Monday, 12-May-2014 00:18:29 UTC