Knowledge Base

TLS Battery Box Set Up for Riegl Scanners

The TLS battery box is comprised of a small Pelican case containing 2 PowerSonic PS-12180NB batteries. They are 12.0 V, 18.0 Ah batteries connected in series for a total of 24.0 V as shown in Figure 1 below.


Figure 1                                   

Each battery box comes with a connection kit which includes:

  • 4 leads (Two +, Two -)
  • 4 nut/bolt pairs to connect leads to battery terminals
  • 1 connection to complete circuit and connect to scanner power cable
  • 1 10 Amp fuse holder

Figure 2 below is an image illustrating the proper configuration for the battery box and connections.

 battery box setup.png 

Figure 2

Each battery weighs 12.0 lbs (5.44 kg) and the total weight of each battery box is 30.5 lbs (13.83 kg).

Helpful links:

Attached Files (2)
There are no comments for this article. Be the first to post a comment.
Security Code Security Code
Related Articles RSS Feed
Camera Calibration For Riegl Z Series Scanners
Viewed 1008 times since Tue, May 12, 2015
TLS Field Gear for Riegl Scanners
Viewed 29365 times since Fri, Jan 31, 2014
UNAVCO Summary of RIEGL VZ-6000
Viewed 3613 times since Tue, Aug 28, 2018
Riegl TLS Field Operation Manual and Workflow
Viewed 11811 times since Fri, Jan 31, 2014
Cylindrical Target (White)
Viewed 3072 times since Wed, Jan 8, 2014
Cylindrical Target (Red)
Viewed 6502 times since Wed, Jan 8, 2014
UNAVCO Summary of RIEGL VZ-1000
Viewed 11944 times since Wed, Aug 26, 2015
Camera Calibration For Riegl VZ Series Scanners
Viewed 1470 times since Tue, May 12, 2015
Viewed 4149 times since Wed, Jan 29, 2014
UNAVCO Summary of RIEGL VZ-400 Resources
Viewed 10752 times since Fri, Jan 24, 2014

Last modified: 2019-12-27  16:36:35  America/Denver