| UNAVCO
 


Knowledge Base

Leica GR10 Power Consumption

The mean power consumption during a 12 hour test of the Leica GR10 receiver was: 3.51 W


Testing Procedure:
  • Input: 12 V
  • Agilent N6705B DC power analyzer
  • Power sampling rate: 10 Hz
  • Test was conducted at room temperature
  • Tracking: GPS L1/L2 only
  • Logging one 15 second session
  • Ethernet port was connected (increases power use when connected)
  • Connected to a TRM59800.00 antenna

Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
Trimble NetR9 Power Consumption
Viewed 8106 times since Tue, Oct 4, 2011
Wind Power for Remote DC Powered Stations (2003)
Viewed 3110 times since Sat, Mar 27, 2010
Power - Wind Power Testing at UNAVCO through 2005, Phase 3
Viewed 4303 times since Sat, Mar 27, 2010
Power - Wind Power Testing at UNAVCO through 2005, Phase 2
Viewed 4690 times since Sat, Mar 27, 2010
Power Draw Profile for a Trimble NetRS and Iridium System (polar)
Viewed 10462 times since Sun, Mar 28, 2010
SLA Battery Cold Performance Tests: Gel vs. AGM
Viewed 18340 times since Sun, Mar 28, 2010
Septentrio PolaRx5 Power Consumption
Viewed 3791 times since Fri, Jan 8, 2016
Equipment Power Usage Testing
Viewed 9803 times since Sun, Mar 28, 2010
GNSS Antenna Power Consumption Testing
Viewed 5685 times since Wed, Nov 26, 2014
Septentrio PolaRx4 Power Consumption
Viewed 4265 times since Thu, Sep 29, 2011
MENU
 

Last modified: 2019-12-27  16:36:35  America/Denver