Knowledge Base

Javad Sigma Power Consumption

The mean power consumption during a 12 hour test of the Javad Sigma receiver was: 3.97 W

Testing Procedure:
  • Input: 12 V
  • Agilent N6705B DC power analyzer
  • Power sampling rate: 10 Hz
  • Test was conducted at room temperature
  • Tracking: GPS L1/L2 only
  • Logging one 15 second session
  • Ethernet port was connected (increases power use when connected)
  • Connected to a TRM59800.00 antenna
  • receiver has no internal batteries
  • receiver set to low power mode (GREIS command: "%%set,/par/pwr/lpm,on")
  • LEDs do not light up when receiver is in low power consumption mode

Attached Files
There are no attachments for this article.
There are no comments for this article. Be the first to post a comment.
Security Code Security Code
Related Articles RSS Feed
Power - Wind Power Testing at UNAVCO through 2005, Phase 1
Viewed 3511 times since Sat, Mar 27, 2010
SLA Battery Cold Performance Tests: Gel vs. AGM
Viewed 15158 times since Sun, Mar 28, 2010
Power Draw Profile for a Trimble NetRS and Iridium System (polar)
Viewed 4444 times since Sun, Mar 28, 2010
Summary Report on Forgen 500 Wind Turbine Performance (2007)
Viewed 7881 times since Sat, Mar 27, 2010
Remote Station Power Analysis (2007)
Viewed 3269 times since Sun, Mar 28, 2010
Equipment Power Usage Testing
Viewed 8918 times since Sun, Mar 28, 2010
Septentrio PolaRx5 Power Consumption
Viewed 2960 times since Fri, Jan 8, 2016
Septentrio PolaRx4 Power Consumption
Viewed 3652 times since Thu, Sep 29, 2011
Wind Power for Remote DC Powered Stations (2003)
Viewed 2608 times since Sat, Mar 27, 2010
Trimble NetR9 Power Consumption
Viewed 7269 times since Tue, Oct 4, 2011

Last modified: Monday, 12-May-2014 00:18:29 UTC