Knowledge Base

Digitizing Resolution of the Septentrio PolaRx3e Receiver

While differencing the L2-Y and L2C carrier phase measurements made with a Septentrio PolaRx3e receiver, we have not been able to resolve a banding pattern in the differences or estimate the digitizing resolution of the PolaRx3e.

This analysis was done using a translation of sbf-format data using extended resolution on the phase values beyond the usual 0.001 cycle resolution available in the RINEX observation format

The following figure shows the difference between the L2 and L2C carrier phase measurements for PRN 7 from a PolaRx3e receiver.

Attached Files
There are no attachments for this article.
There are no comments for this article. Be the first to post a comment.
Security Code Security Code
Related Articles RSS Feed
Digitizing Resolution of the Trimble NetR8 Receiver
Viewed 1993 times since Thu, Jan 27, 2011
Digitizing Resolution of the Javad Sigma Receiver
Viewed 1563 times since Tue, Feb 15, 2011
UNAVCO 2003 GPS Receiver and Antenna Testing in Support of the Plate Boundary Observatory (PBO)
Viewed 3575 times since Thu, Jul 16, 2009
Digitizing Resolution of the Trimble NetRS Receiver
Viewed 2267 times since Fri, Feb 4, 2011
Iridium & GPS/GNSS Inteference from Iridium Data Transmitters
Viewed 19140 times since Mon, Oct 24, 2011
Trimble NetRS - tracking behavior changes after firmware upgrade
Viewed 2202 times since Thu, Mar 10, 2011
GPS Receiver and Antenna Testing Report for SuomiNet (2000)
Viewed 4501 times since Wed, Mar 24, 2010
Preliminary Report on Data Quality with a Trimble 5700 GPS Receiver and an Ashtech Choke Ring Antenna (2002)
Viewed 4661 times since Wed, Dec 3, 2008
Topcon GB-1000 First Article Receiver Testing
Viewed 3384 times since Thu, Oct 30, 2008
Digitizing Resolution of the Trimble NetR9 Receiver
Viewed 4178 times since Thu, Feb 3, 2011

Last modified: 2019-12-27  16:36:35  America/Denver