| UNAVCO
 


Knowledge Base

Allen Osborne TurboRogue - How to upgrade firmware

Allen Osborne TurboRogue - How to upgrade firmware

  1. Stop receiver tracking:

    • In the Main Status Display scroll to 1 TRACK using the left arrow key

    • Press ENTER

    • In Tracking Dialog Box, choose Stop Track Now!

    • Press ENTER

    • Answer Yes to Really Stop Tracking Now?? with left arrow key

    • Press ENTER

    • Press ESC

    • There should be no satellites in top row of main status screen

  2. Take out data flashcard from receiver and insert firmware upgrade flashcard

  3. Make sure firmware upgrade flashcard has write protection off (white latch on flashcard end)

  4. In the Main Status Display scroll to FLASH 4 using the right arrow key

  5. Press ENTER

  6. In FlashCard Dialog Box , choose Flash Control using down arrow key

  7. Press ENTER

  8. Scroll to Program using the left arrow key

  9. Press ENTER

  10. Choose Program using the left arrow key

  11. Press ENTER, the upgrade will take a few minutes

  12. When Flash Status says Copy Complete, press ESC

  13. Remove firmware upgrade flashcard and reinsert data flashcard

  14. Turn receiver off and back on again

  15. Confirm Firmware version on front display (3.2.32.8, 1998/12/28)

  16. Press ESC to return to Main Status Display and confirm receiver tracking

  17. Return firmware upgrade flashcard to address below

  18. Note day and time (UTC) of upgrade and receiver serial number in the return shipment

Attached Files
There are no attachments for this article.
Comments (1)
Comment by michael sanchez on Wed, Oct 17th, 2012 at 6:08 PM
my AO TurboRogue does not turn on, with power connected and OK, is there an internal battery?
Name
Email
Security Code Security Code
Related Articles RSS Feed
Allen Osborne TurboRogue Resource Page
Viewed 2750 times since Fri, Dec 4, 2009
Allen Osborne TurboRogue - How to download and QC data
Viewed 1474 times since Tue, Feb 10, 2009
AOA Receivers Benchmark Test (1998)
Viewed 3027 times since Thu, Sep 10, 2009
Allen Osborne TurboRogue - Terminal commands
Viewed 1552 times since Thu, Sep 10, 2009
GNEX Software (JPL) - description only
Viewed 1954 times since Thu, Sep 17, 2015
MENU

Last modified: Monday, 12-May-2014 00:18:29 UTC