| UNAVCO
 


Knowledge Base

Trimble 5700/R7 and Survey Controller - How to download data from the PCMCIA or compact flash card

Trimble 5700/R7 and TSC1 Survey Controller - How to download data from the PCMCIA or compact flash card

  1. Create a directory with the name of your project.

  2. Put the base station PC card into the card reader.

  3. Drag the base file(s) into your project directory.

  4. You may wish to rename the file, changing the first 4 numbers to “base”, leaving the Julian day and index number alone.

  5. Right click the file and choose convert to “.DAT” format.

  6. Place the rover’s PC card into the card reader.

  7. Open Trimble Data Transfer.

  8. Select PC card under device. Make sure the green connect button is depressed.

  9. Click the “Add” button.

  10. Select your project directory for the destination directory; click Open.

  11. Highlight your job file with a single click.

  12. Click Transfer All.

Attached Files (1)
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
Trimble Survey Controller Software for the TSCe - v11.40 Help File
Viewed 1875 times since Fri, Jan 8, 2010
Trimble Survey Controller Software for the TSCe - v11.40 Release Notes
Viewed 1712 times since Fri, Jan 8, 2010
Trimble 5700 - How to configure for RTK stakeout surveys
Viewed 2782 times since Tue, Jan 26, 2010
Trimble R7 and 5700 Firmware issue for receivers with FW less than 2.3
Viewed 11697 times since Tue, Mar 1, 2016
Trimble 5700 - Datasheet
Viewed 2554 times since Thu, Dec 3, 2009
Trimble R8/5800/4800 Resource Page
Viewed 15963 times since Tue, Dec 15, 2009
Trimble R7/5700 - System Card
Viewed 2086 times since Thu, Jan 21, 2010
Trimble R7-R8 - User Guide, v1.00 Rev. A, September 2003
Viewed 1710 times since Mon, Feb 23, 2009
Trimble R-Series Receiver Firmware
Viewed 1993 times since Fri, May 1, 2009
MENU

Last modified: Monday, 12-May-2014 00:18:29 UTC