Knowledge Base

Topcon Net-G3A Power Consumption

The mean power consumption during a 12 hour test of the Topcon Net-G3A receiver was: 4.02 W

Testing Procedure:
  • Input: 12 V
  • Agilent N6705B DC power analyzer
  • Power sampling rate: 10 Hz
  • Test was conducted at room temperature
  • Tracking: GPS L1/L2 only
  • Logging one 15 second session
  • Ethernet port was connected (increases power use when connected)
  • Connected to a TRM59800.00 antenna
  • the receivers internal batteries were fully charged

Attached Files
There are no attachments for this article.
There are no comments for this article. Be the first to post a comment.
Security Code Security Code
Related Articles RSS Feed
Septentrio PolaRx4 Power Consumption
Viewed 4132 times since Thu, Sep 29, 2011
Wind Power for Remote DC Powered Stations (2003)
Viewed 3028 times since Sat, Mar 27, 2010
Power Draw Profile for Trimble NetRS and Iridium Systems
Viewed 6458 times since Sat, Aug 28, 2010
Remote Station Power Analysis (2007)
Viewed 3806 times since Sun, Mar 28, 2010
Equipment Power Usage Testing
Viewed 9678 times since Sun, Mar 28, 2010
Power Draw Profile for a Trimble NetRS and Iridium System (polar)
Viewed 10367 times since Sun, Mar 28, 2010
Trimble NetR9 Power Consumption
Viewed 7965 times since Tue, Oct 4, 2011
Leica GR10 Power Consumption
Viewed 7970 times since Tue, Oct 11, 2011
Septentrio PolaRx5 Power Consumption
Viewed 3607 times since Fri, Jan 8, 2016
Power - Wind Power Testing at UNAVCO through 2005, Phase 3
Viewed 4214 times since Sat, Mar 27, 2010

Last modified: 2019-12-27  16:36:35  America/Denver