| UNAVCO
 


Knowledge Base

Javad Sigma Power Consumption

The mean power consumption during a 12 hour test of the Javad Sigma receiver was: 3.97 W



Testing Procedure:
  • Input: 12 V
  • Agilent N6705B DC power analyzer
  • Power sampling rate: 10 Hz
  • Test was conducted at room temperature
  • Tracking: GPS L1/L2 only
  • Logging one 15 second session
  • Ethernet port was connected (increases power use when connected)
  • Connected to a TRM59800.00 antenna
  • receiver has no internal batteries
  • receiver set to low power mode (GREIS command: "%%set,/par/pwr/lpm,on")
  • LEDs do not light up when receiver is in low power consumption mode

Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
Power - Wind Power Testing at UNAVCO through 2005, Phase 2
Viewed 4572 times since Sat, Mar 27, 2010
Equipment Power Usage Testing
Viewed 9678 times since Sun, Mar 28, 2010
Septentrio PolaRx5 Power Consumption
Viewed 3607 times since Fri, Jan 8, 2016
Remote Station Power Analysis (2007)
Viewed 3806 times since Sun, Mar 28, 2010
Power - Wind Power Testing at UNAVCO through 2005, Phase 1
Viewed 4017 times since Sat, Mar 27, 2010
Septentrio PolaRx4 Power Consumption
Viewed 4132 times since Thu, Sep 29, 2011
Wind Power for Remote DC Powered Stations (2003)
Viewed 3028 times since Sat, Mar 27, 2010
Leica GR10 Power Consumption
Viewed 7970 times since Tue, Oct 11, 2011
Topcon Net-G3A Power Consumption
Viewed 3778 times since Mon, Oct 10, 2011
Power - Wind Power Testing at UNAVCO through 2005, Phase 3
Viewed 4214 times since Sat, Mar 27, 2010
MENU
 

Last modified: 2019-12-27  16:36:35  America/Denver