| UNAVCO
 


Knowledge Base

Trimble NetR9 Power Consumption

The mean power consumption during a 12 hour test of the Trimble NetR9 receiver was: 3.67 W



Testing Procedure:
  • Input: 16 V
  • Agilent N6705B DC power analyzer
  • Power sampling rate: 10 Hz
  • Test was conducted at room temperature
  • Tracking GPS L1/L2 only
  • Logging one 15 second session
  • Ethernet port was connected (increases power use by ~0.1W)
  • Connected to a TRM59800.00 antenna
  • USB thumb drive attached (increases power use by ~0.4W)
  • Firmware version 4.43
Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
Equipment Power Usage Testing
Viewed 8885 times since Sun, Mar 28, 2010
SLA Battery Cold Performance Tests: Gel vs. AGM
Viewed 14928 times since Sun, Mar 28, 2010
Javad Sigma Power Consumption
Viewed 6271 times since Wed, Oct 5, 2011
Power Draw Profile for a Trimble NetRS and Iridium System (polar)
Viewed 4413 times since Sun, Mar 28, 2010
Power - Wind Power Testing at UNAVCO through 2005, Phase 3
Viewed 3641 times since Sat, Mar 27, 2010
Septentrio PolaRx4 Power Consumption
Viewed 3639 times since Thu, Sep 29, 2011
Power Draw Profile for Trimble NetRS and Iridium Systems
Viewed 5831 times since Sat, Aug 28, 2010
Trimble NetRS - Power Draw Tests
Viewed 4648 times since Sun, Mar 28, 2010
Wind Power for Remote DC Powered Stations (2003)
Viewed 2593 times since Sat, Mar 27, 2010
Power - Wind Power Testing at UNAVCO through 2005, Phase 1
Viewed 3494 times since Sat, Mar 27, 2010
MENU

Last modified: Monday, 12-May-2014 00:18:29 UTC