| UNAVCO
 


Knowledge Base

Septentrio PolaRx4 Power Consumption

The mean power consumption during a 12 hour test of the Septentrio PolaRx4 Pro receiver was: 6.11 W


Testing Procedure:

  • Input: 15 V bias
  • Agilent N6705B DC power analyzer
  • Power sampling rate: 10 Hz
  • The test was conducted at room temperature
  • Tracking GPS L1/L2 only
  • Logging one 15 second session
  • Ethernet port connected (increases power consumption by ~0.1W)
  • Connected to a TRM59800.00 antenna
Note: Changing the receiver’s configuration, antenna, etc. can increase or decrease power consumption.
Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
SLA Battery Cold Performance Tests: Gel vs. AGM
Viewed 17833 times since Sun, Mar 28, 2010
GNSS Antenna Power Consumption Testing
Viewed 5585 times since Wed, Nov 26, 2014
Trimble NetR9 Power Consumption
Viewed 7965 times since Tue, Oct 4, 2011
Remote Station Power Analysis (2007)
Viewed 3806 times since Sun, Mar 28, 2010
Power - Wind Power Testing at UNAVCO through 2005, Phase 1
Viewed 4016 times since Sat, Mar 27, 2010
Equipment Power Usage Testing
Viewed 9678 times since Sun, Mar 28, 2010
Wind Power for Remote DC Powered Stations (2003)
Viewed 3028 times since Sat, Mar 27, 2010
Leica GR10 Power Consumption
Viewed 7970 times since Tue, Oct 11, 2011
Topcon Net-G3A Power Consumption
Viewed 3778 times since Mon, Oct 10, 2011
Power - Wind Power Testing at UNAVCO through 2005, Phase 2
Viewed 4572 times since Sat, Mar 27, 2010
MENU
 

Last modified: 2019-12-27  16:36:35  America/Denver