| UNAVCO
 


Knowledge Base

Topcon Net-G3 and Net-G3A Resource Page

Topcon Net-G3 and Net-G3A Resource Page

Back to receiver comparison page
Receiver
GNSS ?
Available as special buy
Available on loan
Serviceable at UNAVCO
File Size (24 hr, 15 s)
Memory
Time lasts recording at 15 s
Power draw w/ antenna
Time lasts on 18amphr battery
Topcon Net-G3
Y

N

N

Y

6.8 MB
 

up to 8 GB CF card

3.2 years

4 W

1.9 days

The Topcon Net-G3 is in use at several IGS sites.

  • No screen; LED lights indicate operating mode.

  • Tracks L1, L2, & L5 carrier, CA, L1 P, L2 P, L2C (GPS), L1, L2, & L5 carrier, L1CA, L2CA, L1 P, L2 P (GLONASS), E2-L1-E1, E5 (Galileo).

  • Data stored on removable compact flash card (up to 8 GB).

  • Native data format is TPS

Topcon Resources

Software and Configuration Files

Online Discussion Forum

Firmware Files

How To's and FAQ

Attached Files (3)
Comments (10)
Comment by David Zuliani on Sat, Oct 12th, 2013 at 9:17 AM
I work for OGS which is an Italian Government research insitute. OGS is an UNAVCO associate member. I’m going to buy a Topcon Net-G3A and I’d like to know if the UNAVCO version as some special options enabled (e.g. high update rate, high RTK rate,...). My second question is how to take the special discount reserved for the UNAVCO members. Last time (7 years ago) I did it directly with my local retailer. Is it still the same?
Comment by marco on Thu, Aug 11th, 2011 at 1:25 PM
Any positive feedback with commonly used CF cards? Suggested CF card insiede operator manual are all difficult to find.... Thank you
Comment by Chris on Tue, Mar 1st, 2011 at 3:07 PM
How I can configure topcon net g3 via PCCDU to streaming data using ethernet port? Thank you.
Comment by Jim on Wed, Dec 22nd, 2010 at 4:04 PM
The best method or configuration for streaming data out the serial port into a “Device Server” and out to an Ethernet port?
Comment by Frederick Blume on Thu, Dec 2nd, 2010 at 7:27 PM
We have just received Net-G3A receivers and are evaluating firmware 3.5 See the GRIL manual for instructions on setting up TCP streams.
Comment by GPS Processor on Thu, Dec 2nd, 2010 at 7:23 PM
Has UNAVCO tested firmware version 3.5 May,06,2010? Would be interested in #2 above as well.
Comment by Frederick Blume on Wed, Jul 21st, 2010 at 4:14 PM
As stated in the product brochure available from the links above, the Net-G3A does have an internal web server. The owners’ manual contains details as to its use.
Comment by Guilherme Poleszuk on Wed, Jul 21st, 2010 at 3:05 AM
I’d like to know if this Net-G3A has a web internal webinterface as Trimble NetR8. It needs to be charged to card or firmware region of the receiver for the first time? Kind Regards Presidente Prudente, São Paulo, Brazil
Comment by susilo on Tue, Dec 22nd, 2009 at 6:45 AM
How to configure topcon net g3 to streaming data using ethernet port? thanks
Comment by susilo on Thu, Dec 10th, 2009 at 8:48 AM
Could you give me how to integrating vaisala ptu303 with topcon Net-G3. Thanks you
Name
Email
Security Code Security Code
MENU

Last modified: Monday, 12-May-2014 00:18:29 UTC