
Be sure to check back before re-deploying your radios  I have  attached latest firmware (900 Mhz), but there is newer firmware  under test.



To upgrade the firmware, run the application (you will have to  remove the underscore after the .exe) on a PC with an available  serial port.  Use a programming/diag cable to connect the EB-1 to  the PC.



The application asks a series of questions before upgrading the  firmware.  The application has a simple terminal program built in   you should use this to place the unit in setup mode (by sending  Shift-U) before selecting Option 1 from the main menu to upgrade  the firmware.  You should select the Diag port, and high-speed  download when prompted.  Upgrade should only take about 30  seconds.  It is a robust process and will recover if there is an  error or if you have to start over.



Please let me know if you have any questions.



Thanks,



Peter

