TLS Battery Box Set Up for Riegl Scanners

The TLS battery box is comprised of a small Pelican case containing 2 PowerSonic PS-12180NB batteries. They are 12.0 V, 18.0 Ah batteries connected in series for a total of 24.0 V as shown in Figure 1 below.

batterybox.png

Figure 1                                   

Each battery box comes with a connection kit which includes:

  • 4 leads (Two +, Two -)
  • 4 nut/bolt pairs to connect leads to battery terminals
  • 1 connection to complete circuit and connect to scanner power cable
  • 1 10 Amp fuse holder

Figure 2 below is an image illustrating the proper configuration for the battery box and connections.

 battery box setup.png 

Figure 2

Each battery weighs 12.0 lbs (5.44 kg) and the total weight of each battery box is 30.5 lbs (13.83 kg).

Helpful links:

Posted by: Greg Koltz - March 6, 2014. This article has been viewed 406 times.
Online URL: https://kb.unavco.org/article/tls-battery-box-set-up-for-riegl-scanners-797.html

Powered by PHPKB (Knowledge Base Software)