Trimble WinFlash - How to load new firmware onto the Trimble 4700 receiver
The attached executable contains Trimble WinFlash, a Windows-based utility to load new firmware onto select Trimble GPS receivers, including the 4700. Please note that some USB-to-serial adapters will not work with this program because they do not send a break.
Note: The comms cable must be connected to the Comm 2 port on the 4700 receiver.
To run WinFlash:
|Posted by: Beth Bartel - December 14, 2009. This article has been viewed 1133 times.|
|Online URL: https://kb.unavco.org/article/trimble-winflash-how-to-load-new-firmware-onto-the-trimble-4700-receiver-229.html|
Powered by PHPKB (Knowledge Base Software)